The
RealWood™
tag ensures you are buying authentic Brazilian Hardwood. Always insist on
RealWood™
to insure you have the most beautiful and practical (rot and insect
resistant) decking in the world.
Look for the
RealWood™
tag to be
sure that you getting premium genuine Brazilian decking.
| |
Deck Oil Finishing - Photo Journey
|
| |
| We recently helped out a local customer who needed his
Brazilian Ipe deck oiled. I was along with a camera so we
can share with you how easy it is to start your deck on the proper way
to a long and beautiful life. |
Overview
The project was to apply Penofin ® Deck Oil Finisher to a new home in Atlanta. This home has two large
porches. The customer installed our Conventional Ipe 1x6 decking on
both the upper and lower porches. The total size is approximately
1000 square feet. The total time for 4 men was
approximately 2 hours. Part of this time was moving construction
materials so we could work on the deck. |
 |
|
|
|
|
Material Needed
- 5 gallon bucket
- 2 Gallons of Penofin ® Cedar deck oil
- 2 - long handle bristle brooms (see photo of blue broom right)
- Various rags and a Tee-Shirt
- Mineral spirits or paint thinner for clean up
- 4 Men
|
 |
|
|
|
|
How To
- We used the 5 Gallon bucket to hold our Penofin ® deck oil
- The blue broom was used as a applicator to insure our Penofin
®
was distributed deep between on the sides of the deck boards
- The second blue broom was wrapped with a tee-shirt to become a
second applicator and to smooth out any excess Penofin ®
- SHAKE WELL BEFORE USING. DO NOT add thinning or blending agents.
Apply Penofin to a clean, dry surface.
- Surface must be free of dirt and sawdust build-up. Do not apply in
direct, HOT sunlight (when wood is hot to the touch).
|
 |
|
|
|
|
Dramatic Difference
- You can see here how your deck will have the colors you expect
from Ipe or any decking by the application of the UV Finishing deck
oils.
|
 |
|
|
|
|
Finished Deck
- Still wet but you can see this will be a beautiful deck with the
colors really brought to life with the Penofin ® deck oil
- Surface will be dry to the touch in three hours, and ready for use
in 12 hours
- Total time for 4 men was under two hours
Other photo tips Ipe Deck
Cleaning and
Cleaning and Finishing 2 top of page |
 |
|
|
|
|
|
|
Note: It is the responsibility of
you the owner or installer to adequately test pressure washing, cleaning
or finishing for product suitability and application method for your
particular installation. The above are techniques that have worked for
others in the past and we want to share information that we hear for the
benefit of others. However, you need to test and insure that any of
these ideas will work in your specific application. |
|
|
