Prices  Species  Product  FAQs  HowTo  Resources  Email ABSWoodAdd to Favorites352-508-4990  404-549-4840


The RealWood™ tag ensures you are buying authentic Brazilian Hardwood.  Always insist on RealWood™ to insure you have the most beautiful and practical (rot and insect resistant) decking in the world.

Look for the RealWood™ tag to be sure that you getting premium genuine Brazilian decking.

 

 
 

 Ipe Clip Extreme ®

 
 
  The Ipe Clip Extreme requires a groove (kerf) cut into the side of the deck board.   We do this in our inhouse mill shop or you can do it on the jobsite with a biscuit cutter tool.

Well over 90 percent of our contractor customers have us pre-groove the board.  It reduces labor on the jobsite.
 
       
 

Summary of fastening methods

Face Screwed deck installation is preferred over nails because they simply hold better. In addition, you can choose stainless steel screws, which will not stain your beautiful decking. Stainless steel nails are only (easily) available in finish nails because SS nails are too soft to use for most applications.

Hidden Fastener Clips are often chosen by customers who don’t want to see the heads of the screws in the face of their deck boards. To use these, the boards must be kerfed (grooved) on the sides so that the clips can be inserted into the boards.

The Ipe Clip Extreme is an effective product made of stainless steel covered with plastic to blend in with the wood color. This ipe clip is installed by driving a screw through the hole in the clip at a 45 degree angle and through the board thereby holding the board from moving as the board shrinks slightly. Most installers find it easier to pre-drill a hole in the board so that they can drive the screw more easily. This pre-drilling to install the ipe clip is an extra step that some prefer to avoid.

Aluminum Deck Clip ™ are preferred by some installers because pre-drilling is not necessary. These deck clips are durable and hold well but the boards may shift as they shrink because the screws are not driven down through the board. The screws are driven straight down through the clips between the boards.   Using All Weather Sub Floor Adhesive solves this problem.

Courtesy Brazilian Wood Depot.

Prices

Local Contractor love the  Ipe Clip Extreme ®

Why to Use: Local builders recommend the Ipe Clip Extreme ® system.  Their reasoning is that the  Ipe Clip Extreme ® is quicker to install and is much easier to use than other systems.  Unlike other hidden fasteners the  Ipe Clip Extreme ® is installed completely from the top of the deck.  Frequently decks are either high or very close to the ground. In these cases, a below deck hidden fastener would either require a ladder or laying on the ground.  Either way it would require you to be constantly looking up and turning your head and neck into a cramped and un-natural position.  The Ipe Clip, being installed from the top of the deck requires no additional body strain.

 

Detail Photo of  Ipe Clip Extreme ®

Click to Enlarge

 

 

 

  

 

Support: We have expanded use of the  Ipe Clip Extreme ® for any of our conventional decking by supplying complementary Jatoba, Cumaru, or Tigerwood plugs.

 
     

 

Biscuit Cutter: By far the majority of Contractors and Retail Customer have us groove (kerf) their decking at our Mill Shop.  However, if you prefer to cut your own grooves the the best method is with a Biscuit Cutter. 

Settings: Use a #2 Blade and center the Biscuit Cutter on the decking.  The models vary however be sure to use either 3/4" or 1" depending upon the decking involved.

Specifications: 1"x1" with a 3/32" deck spacking

FAQ: Ipe Clip ® FAQ from the Ipe Clip ® site 

Prices
 
* Content on this page is summarize from the Ipe Clip ® and YouTube.com websites

ABSWood is home of the realwood.org woods including
realipe realcumaru realjatoba realtigerwood realgarapa
realtatajuba realsucupira realtatajuba Go Natural!

Warehouse Visit | Site Map | Terms and Conditions | Privacy Policy
©2007-2008 Advanced Building Supplies, Inc.